|Output Power||Continuously adjustable, maximum value is 3W±25%|
|Timing function||0-60min continuously adjustable, the error is controlled within 10%. The warming signals will be sent out once the treatment is over.|
|Cooling Function of Treatment Head||the surface treatment is no more than 55°C|
|Working Conditions||a Relative humidity:≤80%|
b Temperature range: 5-40°C
c The working environment should be free from corrosive gas. Do not use the device in the environment where strong
electromagnetic field exists.
1.650NM LASER FUNCTION: 650nm laser irradiation can penetrate elastic fiber of vaginal wall,improve vagina blood flow,Supply oxygen and nutrient to vaginal, repair damaged elastic fiber tissue,Stimulate the dry and relaxation vaginal,Strengthen the stretching force of the muscle around the vagina to achieve a tightening effect.
2.VIBRATION FUNCTION: The gynecological women laser device can Enhanced vaginal sensitivity and the low level laser widely used in the clinic over 20 years in the worldwide and the clinic results show that the low level laser has effect on Mild cervical erosion, cervicitis & mild non-specific vaginitis & Viginal tighten.
3.Efficacy: Anti-inflammatory, anti-tumor, detox/eliminate odors and pruritus, improve blood viscosity, promote blood circulation.
4.IPX4 waterproof. The device mainly consists Semiconductor LED module, lllumination probe,Time control system,Power supply system.
Note: Prohibited by pregnant women
A.Connect the power line of the host to the power supply, and connect the required probe of the use terminal.
B.Turn on the power switch on the back of the host, and the host will start up with a sound of "dripping'". The default working time is 30 minutes.
C.Time key, short press valid, time set to 10 minutes, 20 minutes, 30 minutes, 40 minutes, 50 minutes, 60 minutes.
D.Start stop key, short press valid, short press start stop key to start/ pause the current function output.
E Switch key, short press effective, short press switch key, you can switch the output state of current red and blue function in real time. The product is in the red light output state by default when it is turned on. In the red light output state, the corresponding "red" indicator light of the product is on; when it is switched to the blue light output state, the corresponding "blue" indicator light of the product is on.
F.Press the intensity key for a short time to be effective. The corresponding gear has intensity level 1, intensity level 2 and intensity level 3. Press the intensity key for a short time to switch the intensity state of the current red / blue light output in real time. The corresponding product intensity gear indicator lights up synchronously. The product starts up in intensity level 1 by default.
G.The button operation of the product is accompanied by the corresponding buzzer prompt sound as a prompt.
Timing function 0-60min continuously adjustable, the error is controlled within 10%. The warming signals will be sent out once the treatment is over.
Cooling Function of Treatment Head the surface treatment is no more than 55°C
Ozone Output ≥10mg/h
Temperature range: 5-40°C
1 x Host
1 x Gynaecology Stick
1 x Single Moudle Probe
1 x Manual
1 x Warranty card
1 x Power Adaptor